+974 4460 1583 / 84 / 85 info@teyseerbm.com
Special Products Division

SPD is a young division under the gamut of “TBMTC”. Started with an idea of catering to special requirements of our clients, we are now well known in the market as JOINTING SYSTEM SOLUTION PROVIDER.

With our customer-centric approach, SPD concentrates on offering solutions to the needs of contractors with a focus on delivering superior quality materials at economical pricing.

 

COMPRESSIBLE FILLER BOARDS

DURABOARD is a chemically cross linked foam, close cell and high performance joint filler board. It has compressible and superior recovery properties, preventing water absorption into the joint, eliminating the problems of mould growth and freeze fracture around the joint.

Advantages

  • Excellent chemical resistance
  • Thermally stable (from - 40°C to + 70°C)
  • Bitumen free
  • Excellent resilient recovery
  • Easy to use
  • High compression recovery

 

C3000XL

 

Density: 30+(kg/m3)

Recovery: Above 90%

Water Absorption: Negligible

C3000

 

Density: 35+(kg/m3)

Recovery: Above 99%

Water Absorption: Negligible

T60+

 

Density: 60 +(kg/m3)

Recovery: Above 96%

Water Absorption: Negligible

 

Available in

  • 12mm,18mm,20 mm,25 mm,50 mm thickness
  • 1mtr x 2mtr
  • Other thickness and sizes also available on request ( 1.2*2.2 and thickness upto 300 mm)

(WE ALSO OFFER BACKER RODS in SIZES -10-12-15-20-25-30-40-50& 75 mm dia)

PVC WATERSTOPS

Sure-Stop® PVC Waterstops lead the way in high technology waterstops and comply with international standards.

Sure-Stop® PVC Waterstops are extruded from specially compounded PVC in accordance with BS2782 and they are designed for use in water retaining and water excluding structures where a positive seal is required for poured in-situ concrete expansion, construction and contraction joints.

Advantages

  • Sure-Stop® PVC Waterstops conform to, and exceed all major international standards
  • High quality compounded PVC for long term durability and integrity
  • Factory made intersections to simplify and minimise on-site fabrication
  • Internal profiles come with factory pre-punched eyelets for easy and secure wire tying to reinforcement
  • Ability to withstand high hydrostatic head pressures

 

Sure-Stop® PVC Waterstops

Technical Properties

Tensile Above 15 (N/mm2)

Elongation Above 300%

Hardness above 75

Available in -200 mm, 250 mm & 320 mm

Roll length- 20 mtrs,15 mtrs and 10 mtrs.

Types-IC,EC,IE & EE

SWELLABLE WATERSTOPS

Hydrophilic Swellable Waterstop are made of unique sealing compound which expands It is is ideal for use in horizontal and vertical construction joints for cast in-situ concrete structures.

Advantages

  • Conforms easily for installation onto rough or smooth concrete surfaces.
  • Allows concrete to gain strength before expansion due to built-in expansion control system.
  • Long term durability & integrity.
  • No compaction or displacement problems.
  • Unaffected by repeated wet and dry cycles.
  • Can withstand 60 metres (6.0 Bar) of hydrostatic head pressure.

 

CJ 5000 ( Chloroprene)

Properties

Suitable for Salt Water

Upto 6 Bar

Controlled Expansion

Available in 10mm*20 mm

47 B ( Butyl)

Properties

Suitable for All applications

Upto 5 Bar

Controlled Expansion

Available in 15mm*20 mm

 

Available in

  • 12mm,18mm,20 mm,25 mm,50 mm thickness
  • 1mtr x 2mtr
  • Other thickness and sizes also available on request ( 1.2*2.2 and thickness upto 300 mm)

(WE ALSO OFFER BACKER RODS in SIZES -10-12-15-20-25-30-40-50& 75 mm dia)

INJECTION HOSE SYSTEM

Waterproof X®1 is state of the art, multi-injectable injection hose system, used to seal joints in concrete against water egress. Waterproof X®1 injection hose is used to transport grouting materials and then disperse them into the concrete joint via micro openings along the hose. Waterproof X®1 injection hose is a highly resistant, robust, fully tested, single channel injection hose system that is made of specially developed PVC materials.

Advantages

  • Injection hose is supplied on handy spool that allows for uncomplicated cutting to length due to numerical markings printed at every metre along the hose
  • Low consumption of grouting material due to optimum inner hose diameter
  • Maximum safety features as grouting processes are performed under very low pressures
  • Simple grouting process with multi-injectable capabilities
  • Multiple grouting materials can be processed
  • Ultimate grouting processes performed at 10m-12m intervals between injection points. Over length injections of up to 30 metres can be achieved with special injection processes and use of correct equipment
  • Highly economical due to rapid laying times and injection processes

 

 

SYSTEM COMPONENT

  • Waterproof X®1 injection hose _ 120 metres roll _ numerical markings every metre on hose.
  • CJ-Reinforced PVC Hose _ only required for special applications to channel grouting material.
  • Varioclix D Injection Point _ dual injection point (can split into two single injection points).
  • Varioclix BS Injection Point _ dual injection point with blue spacer.
  • CJ-Hose Clamp _ holds hose into position on concrete surface, used in conjunction with impact plug.
  • CJ-Impact Plug _ securing pin for use with hose clamp.
  • CJ-Hose Joiner _ to join CJ-Reinforced PVC hose to Waterproof X®1 hose.
  • Injection pumps, Injection resins & Injection nipples _ used to perform the injection process.

ACCESSORRIES

Form Tie

Swellable Plug

Injection Kit

DOWEL BARS & SLEEVES

SS 316 Dowel Bars

We supply SS 316 L grade Dowel Bars. These Bars offer High tensile of over 500.

Sizes Available- 12 mm ,16 mm, 20 mm, 25 mm,32 mm & 40mm

Length Can be customized Based on requirement.

 

MS/GI /HDG Dowel Bars

We supply High Quality GI/HDG Dowel Bars These are made out of S 275Jr Grade MS rods. Minimum coating of 100 Microns upto 300 microns.

Sizes Available- 12 mm ,16 mm, 20 mm, 25 mm,32 mm & 40mm

Length Can be customized Based on requirement.

 

Epoxy Coated Dowel Bars ( QATAR STEEL)

We supply Epoxy coated ( fusion bonded) These are made out of Grade 60 Steel. Minimum coating of 200 Microns upto 300 microns.

Sizes Available- 12 mm ,16 mm, 20 mm, 25 mm,30 mm ,32 mm & 40mm

Length Can be customized Based on requirement.

We also Supply Sleeves for Dowels with end cap fitted with compressible filler

SEALANTS

SILICON SEALANT ( Neutral)

SCS2000 Silpruf – This is the most popular Neutral cure silicone sealant from Momentive. It has got excellent adhesion to variety of substrates with +/- 50% movement accommodation. This is very popular with Aluminum composite panels installation, Unitized curtain wall installers, aluminum fabricators, civil contractors etc.

Colors Available- Black & White. Other colors are also available on request.

Size- 310 ml Cartridge & 600 ml Sausage.

 

FIRE RATED SILICON SEALANT

Pensil 300 – this is a neutral cure, FIRE RATED silicone sealant with Qatar civil Defense approval. It can be used wherever fire rated silicone is recommended.

Colors Available- Black & White. Other colors are also available on request.

Size- 310 ml Cartridge & 600 ml Sausage.

 

PU SEALANT

Soudaflex FC 40-This is a high grade multipurpose PU sealant. It suits both non trafficable and Trafficable. Movement factor is upto 25% with Hardness of 40.

Colors Available- Black & White. Other colors are also available on request.

Size- 310 ml Cartridge & 600 ml Sausage.

FLOOR AND MEMBRANE PROTECTION

PP CORRUGATED SHEET

We offer high quality PP protection sheet which are available in various GSM and thickness

Available from 2 mm to 6 mm thickness

Size-1m * 2 m

 

FLOOR PROTECTOR

Our flexible Floor protector is undoubtable the best product available in market for this application.

3 Layers, German Technology ,Cross Linked. Available in 3 to 6 mm thickness

Size- 97.5 Sqm ( 1 roll)

BITUMEN IMPREGNATED FILLER BOARDS

Bitumen Filler board is used as a general purpose expansion joint filler in concrete slab and wall construction, and as a protection board for waterproofing membranes. It is made from sugar cane husk, cane fibers are longer and more resilent for Superior Expansion and Contraction In Filler Board.

Advantages

  • Compression ( Less than 3 % loss by weight)
  • Extrusion (Less than 3 mm)
  • Recovery ( Above 80%)
  • Excellent concrete bonding
  • Durable

 

10 % Bitumen Impregnation

Bitumen Content: Above 10 %

Recovery: Above 80 %

Water Absorption: Negligible

Application: Expansion Joints

Complies to QCS 2014

Available in:

10 mm* 1220mm* 2200mm

12 mm* 1220mm* 2200mm

18 mm* 1220mm* 2200mm

25 mm* 1220mm* 2200mm

35 % Bitumen Impregnation

Bitumen Content: Above 35 %

Recovery: Above 85 %

Water Absorption: Negligible

Application: Curb Stones

Complies to QCS 2014

Available in:

10 mm* 1220mm* 2200mm

12 mm* 1220mm* 2200mm

18 mm* 1220mm* 2200mm

25 mm* 1220mm* 2200mm

 

Available in

  • 12mm,18mm,20 mm,25 mm,50 mm thickness
  • 1mtr x 2mtr
  • Other thickness and sizes also available on request ( 1.2*2.2 and thickness upto 300 mm)

(WE ALSO OFFER BACKER RODS in SIZES -10-12-15-20-25-30-40-50& 75 mm dia)

FIBEROUS CONCRETE SPACERS

Getting the right Amount of concrete cover is essential for the durability of reinforced concrete structures. Fiber concrete spacers ensure correct concrete cover before and during concreting. They are characterized by high compressive strength and excellent chemical and physical resistance.

Advantages

  • High Density with low porosity
  • High load bearing capacity
  • Same material properties as structural concrete
  • Excellent bond with structural concrete, no hairline cracks

 

Test Parameters

Results

Compressive Strength

Not less than M60

Water Absorption

Less Than 5%

Rapid Chloride Penetration Test

Very Low

Sulphate Content

Less than 0.5% by mass of cement

Chloride Content

Less Than 0.3 kg/cubic meter

Water Penetration

Less than 10mm

Chloride Migration Coefficient

Less Than 3.5 x 10^-12 sqm/sec

Alkali Silica Reactivity

Harmless

Salt Content

Less than 0.01%

Size Available:

  • 25 mm
  • 30 mm
  • 40 mm
  • 50 mm
  • 75 mm
  • 100 mm

Products - Big Vision